CB-3000 What Really WorksSubmitted by: A Satisfied Cuckold Owner
After many attempts at male chastity for my husband, now my cuckold by the way, this is what I did to make the CB-3000 as secure as can be.
First, the KSD-G2 anti-pullout ring works, sort of. Yes, it did prevent pullout, however after a week, things got a little green in and around the ring area. We tried everything to keep the area clean, but in the end, after creating a chaffing on the softened skin with only a cotton swab, I allowed the KSD-G2 to be removed. It is okay for short term security, but I wanted a 'forever' solution as I do not plan on releasing my cuckold for any reason other than a medical emergency.
My cuckold has a PA piercing. This is the solution to total security. He now has a 4ga captive bead ring, in pretty pink acrylic. He has been in it for months with no problems. There were some cautions about using plastic long term, but with the penis, and the natural washing out with urine, there is absolutely no problem.
To make the PA a security solution, I used a piece of nylon with a small loop on each end. Nylon might not look secure, but all I need to know is if he has tampered with his chastity device. Of course he could easily break the plastic seal, etc, but then he would have to deal with me and that I assure you would be a night to remember for him.
I also added a simple waist band and thong strap, made from nylon as well. It is there only to hold the chastity device against his pubic mound. It keeps his penis in the required position in the chastity device.
One last addition I did that really changed cucky's world is the anti-erection spikes. I have four sharp spikes set in the tip of the CB-3000, pointed at the sensitive tip and underside of his captive worm. When he has an erection, or tries anyway, the spikes immediately give him negative feedback. I made the spikes from a small nylon comb, drilling four small holes at the proper locations. The tips are cut to form sharp points. The nylon has just enough 'give' to make a very tight friction fit in the holes.
Cucky is only 2 1/2" soft, and 4 1/2" hard. In the CB-3000, without the spikes, he enjoyed a big 3" erection. Now, with the spikes, he must either stay soft, 2 1/2" soft, or feel the sharp spikes. What happens during the day is he starts to get hard, for whatever reason, and I watch him grimace, then turn his attention to his chores with renewed vigor. I know what happened and I get a real giggle.
At night, when the real involuntary erections occur, he does not have chores to get his mind off things. I have watched him clutching and pulling on the CB-3000 at 4am, trying to get relief. That can take half an hour or more. I usually don't stay up and watch the fun, just smile and go to sleep.
So if you have been thinking about locking up your husband's penis, first get him a PA piercing, then get the CB-3000 and add the spikes. Then go out and get a full-sized boyfriend!
A Satisfied Cuckold Owner
Update! I could not be happier. My cuckold has not had an orgasm in 3 months (I did let him do a prostate massage though. Great fun to watch him use the Aneros on himself and lick up his mess!) The CB-3000 with the modifications is absolutely perfect in every way. No chaffing, no problems. Cucky hates not having his orgasms. Too sad.... and too bad! Boy does he ever keep a clean house though. Not much motivation for me to change anything, is it?
A Satisfied Cuckold Owner
Page last updated 07-Aug-27 by: Altairboy@aol.com