CB-2000 - Using Plastic Lock Through Prince AlbertSubmitted by: chastitech
The numerous complaints about being able to pull out of the CB-2000 can all be addressed by getting a Prince Albert (P.A.) piercing.
I can't recommend this highly enough. Not only does it make the CB-2000 (and the Curve and the CB-3000) impossible to pull out of, but it also:
It's easy to get the U through the first slot and through the P.A. It's more difficult to get it through the second slot. You have to push the U into the cage area, catch the end of the U with your pinky fingernail, and gently guide it into the second slot. This takes some practice. The first few times, I applied too much force to the end of the U, and broke off one of the locking prongs. Now I can do it in about fifteen seconds.
This is still not a perfect solution. The U protrudes into the cage area, which allows the penis to retract somewhat. And the part of the U inside the cage hurts if I become tumescent (well, as tumescent as possible given that I'm encased in a CB!). This could be hot for some people-it does provide negative feedback that discourages erections-but my Wife actually enjoys forcing me to become "erect" inside the CB, so in our case the pain is an unwanted feature. Also, the front lock hangs down so low that it can touch things I would rather not touch when sitting on the toilet. I am working on a solution that involves some polycarbonate tubes glued to the outside of the cage to hold the lock. When I have that working, I will post another article. But in the meantime, this is a pretty good approach.
To avoid irritation from the plastic lock, I cover it with CB-3000/Curve Hinge Sleeve, as described here.
Page last updated 05-Mar-22 by: Altairboy@aol.com