Lori's Chastity TubeSubmitted by: Prg.X
Here are photo's of the Chastity Tube I purchased from Lori. The photos have no scale; the tube is 2-7/8" on the longest side (away from the camera in the left picture), and it's 2-3/8" on the top. It has a 1-3/8" inside diameter.
I think it's important to mention that the lock hasp looks burnt and rough in the picture. I still haven't figured out the reason; but, it does not look anything like that in real life. I've never slid it into a piercing, so I cannot attest to how smooth it is; but, again, the blackness is either a quirk from the photo, or the compression I used.
The tube is kind of sliced and spread, with a hole drilled into each of the edges. The lock slides through the two holes, and through the piercing between.
The end of the tube that is lower in the photo is closer to your body when wearing the tube. It is cut at a 90 degree angle, the opposite end is tapered, in order to match up with the uneveness of the glans.
Lori says the device will work with a Prince Albert Piercing. The only thing I can figure is that the lock would pass through the PA instead of the frenum. That seems like a questionable approach, at best; it would definitely leave a lot of room for the tube to shift, and I doubt it would be very wearable for any duration.
Page last updated 99-May-20 by: Altairboy@aol.com