Stainless Construction Company Chastity Cage
The Stainless "BirdCage"This device is made from Stainless steel strip, 16 ga. (.062"), and 1/2" wide. It is two pieces that when locked together, will prevent any erection, and make masturbation impossible. The two main components are the cock ring, and the cage.
The ring is fitted around the penis, behind the balls, as is traditional for a cock ring. The inside circumference of the ring is the same as the outside circumference of your FLACCID penis - BEHIND the balls. Where the metal of the ring comes together, it is bent at a 90 degree angle, forming two 1/2" plates that have been drilled to accept a small padlock. All edges and corners are nicely rounded off. When measuring, you want to insure it's tight enough not to slip off when flaccid.
The second and main component of the device is the cock cage. Made out of the same 1/2" wide stainless steel strip, there are three parts.
A ring which will slip easily over a completely FLACCID penis is formed to make a circle, and the ends are welded together and ground perfectly smooth. This ring of course will be smaller in diameter than the cock ring described above.
There is a slot milled out of the 3/4" extension that will fit over the 1/2" tabs of the cock ring. The slot will be just larger than 1/8" x 1/2", but no more than needed to fit over the tab. The "U" legs are welded to the outside of the penis ring only, on the vertical joints, and ground smooth with no sharp edges anywhere. One of the legs cover the welded joint in the penis ring, so you cannot see any joint from the outside of the cage. The inside depth of the finished cage is ONE inch longer than your flaccid penis. There is a total of eight weld joints - two on each of the four legs of the cage. The "U" sections cross each other at 90 degrees and are NOT welded together.
Designed by Stainless Steel Construction Company, Byran, Texas
Description by: Chattel
[ BirdCage Advertisement ]
Page last updated 99-Feb-24 by: Altairboy@aol.com